Supported Devices and Download Section
Download Index SBC (Single Board Computer) x86 (Laptop, PC) Amlogic STB (Set-Top-Box) Device Informations OpenWrt 18 Download Section for Amlogic STB OpenWrt 21 Download Section for Amlogic STB
SBC (Single Board Computer)
| Raspberry Pi Version | 18.06 factory | 18.06 sysupgrade | 18.06 rootfs | 21.02 factory | 21.02 sysupgrade | 21.02 rootfs |
|---|---|---|---|---|---|---|
| A/B/B+/Zero/W | Download | Download | Download | Download | Download | Download |
| 2/B | Download | Download | Download | Download | Download | Download |
| 3/B/B+ | Download | Download | Download | Download | Download | Download |
| 4/B/400/CM4 | Download | Download | Download | Download | Download | Download |
| Rockchip Armv8 Devices | 18.06 firmware | 18.06 rootfs | 21.02 firmware | 21.02 rootfs |
|---|---|---|---|---|
| NanoPi R2C | Download | Download | Download | Download |
| NanoPi R2S | Download | Download | Download | Download |
| NanoPi R4S | Download | Download | Download | Download |
| OrangePi R1 Plus | Download | Download | Download | Download |
| OrangePi R1 Plus LTS | Download | Download | Download | Download |
| Sunxi Cortex A7 Devices | 18.06 firmware | 18.06 rootfs | 21.02 firmware | 21.02 rootfs |
|---|---|---|---|---|
| NanoPi M1 Plus | Download | Download | Download | Download |
| NanoPi Neo | Download | Download | Download | Download |
| NanoPi Neo Air | Download | Download | Download | Download |
| NanoPi R1 | Download | Download | Download | Download |
| ZeroPi | Download | Download | Download | Download |
| OrangePi 2 | Download | Download | Download | Download |
| OrangePi One | Download | Download | Download | Download |
| OrangePi PC | Download | Download | Download | Download |
| OrangePi PC Plus | Download | Download | Download | Download |
| OrangePi Plus | Download | Download | Download | Download |
| OrangePi R1 | Download | Download | Download | Download |
| OrangePi Zero | Download | Download | Download | Download |
| Sunxi Cortex A53 Devices | 18.06 firmware | 18.06 rootfs | 21.02 firmware | 21.02 rootfs |
|---|---|---|---|---|
| NanoPi Neo Plus 2 | Download | Download | Download | Download |
| NanoPi Neo 2 | Download | Download | Download | Download |
| NanoPi R1S H5 | Download | Download | Download | Download |
| OrangePi PC 2 | Download | Download | Download | Download |
| OrangePi Zero Plus | Download | Download | Download | Download |
| OrangePi One Plus | Download | Download | None | Download |
| OrangePi 3 | Download | Download | None | Download |
x86 (Laptop, PC)
| CPU Arch. | OpenWrt Version | squashfs UEFI | squashfs Legacy | squashfs rootfs | ext4 UEFI | ext4 Legacy | ext4 rootfs |
|---|---|---|---|---|---|---|---|
| 32bit | 18.06 | Download | Download | Download | Download | Download | Download |
| 32bit | 21.02 | Download | Download | Download | Download | Download | Download |
| 64bit | 18.06 | Download | Download | Download | Download | Download | Download |
| 64bit | 21.02 | Download | Download | Download | Download | Download | Download |
Amlogic STB (Set-Top-Box) Device Informations
| Device Chipset | Device’s Sample |
|---|---|
| s905 | Beelink-Mini-MX-2G, MXQ-PRO+4K |
| s905d | MECOOL-KI-Pro, Phicomm-N1 |
| s905w | X96-Mini, TX3-Mini, W95, X96W/FunTV, MXQ-Pro-4K |
| s905x | B860H, HG680P, TBee-Box |
| s905x2 | X96Max-4G, X96Max-2G, MECOOL-KM3-4G, Tanix-Tx5-Max, A95X-F2 |
| s905x3 | X96-Max+, HK1-Box, Vontar-X3, H96-Max-X3, Ugoos-X3, TX3(QZ), TX3(BZ), X96-Air, X96-Max+_A100, A95XF3-Air, Tencent-Aurora-3Pro(s905x3-b), X96-Max+Q1, X96-Max+100W, X96-Max+_2101, Infinity-B32 |
| s912 | Tanix-TX8-Max, Tanix-TX9-Pro(3G), Tanix-TX9-Pro(2G), Tanix-TX92, Nexbox-A1, Nexbox-A95X-A2, A95X, H96-Pro-Plus, VORKE-Z6-Plus, Mecool-M8S-PRO-L, Vontar-X92, T95Z-Plus, Octopus-Planet, Phicomm-T1 |
| s922x | Beelink-GT-King, Beelink-GT-King-Pro, Ugoos-AM6-Plus, ODROID-N2, X88-King, Ali-CT2000 |
| s905l2 | MGV2000, MGV3000, Wojia-TV-IPBS9505, M301A |
| s905l3 | CM311-1, HG680-LC, M401A |
| s905l3a | E900V22C/D, CM311-1a-YST, M401A, M411A, UNT403A, UNT413A, ZTE-B863AV3.2-M |
| s905l3b | M302A/M304A, E900V22E, Hisense-IP103H, CM211-1 |
OpenWrt 18 Download Section for Amlogic STB
| Device Chipset | Kernel 5.4.238 | Kernel 5.10.176 | Kernel 5.15.105 | Kernel 6.1.22 |
|---|---|---|---|---|
| s905 | Download | Download | Download | Download |
| s905d | Download | Download | Download | Download |
| s905w | Download | Download | Download | Download |
| s905x | Download | Download | Download | Download |
| s905x2 | Download | Download | Download | Download |
| s905x3 | Download | Download | Download | Download |
| s912 | Download | Download | Download | Download |
| s922x | Download | Download | Download | Download |
| s905l2 | Download | Download | Download | Download |
| s905l3 | Download | Download | Download | Download |
| s905l3a | Download | Download | Download | Download |
| s905l3b | Download | Download | Download | Download |
OpenWrt 21 Download Section for Amlogic STB
| Device Chipset | Kernel 5.4.238 | Kernel 5.10.176 | Kernel 5.15.105 | Kernel 6.1.22 |
|---|---|---|---|---|
| s905 | Download | Download | Download | Download |
| s905d | Download | Download | Download | Download |
| s905w | Download | Download | Download | Download |
| s905x | Download | Download | Download | Download |
| s905x2 | Download | Download | Download | Download |
| s905x3 | Download | Download | Download | Download |
| s912 | Download | Download | Download | Download |
| s922x | Download | Download | Download | Download |
| s905l2 | Download | Download | Download | Download |
| s905l3 | Download | Download | Download | Download |
| s905l3a | Download | Download | Download | Download |
| s905l3b | Download | Download | Download | Download |
Catatan STB Firmware:
- Semua Wireless (WiFi) status = 70% ON.
- Status Wireless (WiFi) sangat acak, karena banyaknya perbedaan hardware.
- HG680P dan ZTE (B860H) kernel 5.15.xx: kalau wireless off, ganti dtb ke p212.
STB Firmware Notes:
- All Wireless (WiFi) status = 70% ON.
- Wireless status is random due to various hardware.
- HG680P and ZTE (B860H) kernel 5.15.xx: if wireless off, change dtb to p212.
Firmware rilisan terdahulu (BASE LEDE) bisa dicari di link ini untuk HelmiWrt berbasis Lede, dan tidak ada arsip rilisan terdahulu untuk firmware base ImmortalWrt.
Older firmware release (LEDE BASED ONLY) can be found here for HelmiWrt Lede Based, and there is no archive releases for ImmortalWrt based firmware.
Tutorial Bahasa Indonesia
Kebutuhan Firmware
- SDCard/HDD/Flashdisk 4GB.
- Raspberry Pi 1/2/3/4 atau PC/Laptop.
- PC/Laptop dengan sistem operasi Windows (bisa juga menggunakan OS lain, tapi saya tidak cantumkan instalasinya disini).
- MicroSD Adapter/converter (untuk instalsi Raspberry Pi saja).
Instalasi Firmware
-
Unduh firmware terbaru dari bagian Supported Devices & Download Section diatas, pilih yang ada tulisan sysupgrade atau factory atau UEFI atau Legacy.
- Unduh Rufus atau Balena Etcher.
- Masukkan SDCard/Flashdisk/HDD ke PC via slot USB.
- Buka Rufus/Etcher.
- Pilih disk (SDCard/Flashdisk/HDD).
- Tarik file yang sudah di unduh tadi ke jendela program Rufus/Etcher.
- Mulai burn dan tunggu hingga proses selesai.
- Lepaskan SDCard/Flashdisk/HDD dari USB.
- Masukkan SDCard/Flashdisk/HDD ke slot SdCard Raspberry Pi atau slot USB/HDD pada PC/Laptop.
- Tunggu perangkat Anda hidup.
Rekomendasi setelah install (Tidak Wajib)
- Buka LuCI TTYD Terminal or Putty.
- Jalankan perintah helmiwrt untuk melihat beberapa perintah yang ada.
Informasi Tambahan
- Jika TTYD (Terminal LuCi App) tidak tampil, ubah https://192.168.1.1/…/terminal menjadi http://192.168.1.1/…/terminal.
- Jika OpenClash yacd dashboard panel tidak tampil, ganti protokol https:// menjadi http:// pada address bar browser yang Anda gunakan.
- Gunakanlah OpenClash/Passwall/SSR+, jika ingin menggunakan VPN dengan loadbalance.
- Libernet dan Xderm Mini tidak akan berjalan dengan mwan3 loadbalance. Jika Anda ingin menggunakan salah satu dari kedua aplikasi tersebut setelah memasang loadbalance di perintah helmilb, maka Anda harus menghapus seluruh pengaturan loadbalance pada
etc/config/mwan3secara manual. - OpenClash harus restart ketika Modem Manager (driver untuk modem QMI) restart.
- Jika port Gigabit hanya terbaca 100mb/s, maka ganti dengan kabel LAN yang mendukung Gigabit.
- Koneksi modem dengan protokol ModemManager atau Mobile Data :
Jika ada yang tahu untuk memperbaiki bug ini, sampaikan pendapatmu di Grup Telegram untuk memberikan saran perbaikan.
Catatan
Tidak ada komentar:
Posting Komentar